Clutch Solenoid Valve 6-speed SMG
190,00 €
incl. 19% VAT plus Shipping Costs
The clutch solenoid valve (marked with ‘QPV’) is responsible for actuating the clutch in the SMG system. A faulty valve can cause problems with clutch engagement, such as shuddering, delayed and harsh engagement, or even a complete failure of clutch actuation.
- Condition: New
- Reference numbers: BMW 23427567719, 23427567720
- Compatible vehicles: BMW E46, BMW E60, BMW E63, BMW Z4 E85
In stock
Related Products
Shift Solenoid Valve 6-speed SMG
The shift solenoid valves (marked ‘PPV’) are responsible for engaging the gears in the SMG gearbox. There are two of these pressure-proportional valves mounted on the hydraulic unit. Working in conjunction with the selection valve, they operate the shift actuator. If either valve is faulty, the car may be unable to engage one or more gears.
Pump Relay 6-speed SMG E46
The pump relay is responsible to turn on / off the hydraulic pump of the SMG system. A broken relay causes the pump to fail priming. Without hydraulic pressure, the system cannot engage the clutch or change gears.
Pictures shown are for illustration purpose only. Fits only E46 models.
Pump Relay 6-speed SMG E60 E63 Z4 E85
The pump relay is responsible to turn on / off the hydraulic pump of the SMG system. A broken relay causes the pump to fail priming. Without hydraulic pressure, the system cannot engage the clutch or change gears.
Pictures shown are for illustration purpose only. Not for E46 models.
Hydraulic Line Seal Kit 6-speed SMG
- New seals for the hydraulic lines of the SMG
- Including 9 o-rings
- Material of the seals suitable for SMG requirements
Set Clutch Parts 6-speed SMG (4.0, 4.5, 5.0)
Set of clutch parts contains:
- Pressure plate
- Friction plate
- Release bearing
We sell only Sachs or LUK components, both are original supplier for BMW.
Set Clutch Parts 6-speed SMG (2.5)
Set of clutch parts contains:
- Pressure plate
- Friction plate
- Release bearing
We sell only Sachs or LUK components, both are original supplier for BMW.
Pentosin CHF 11S
Pentosin CHF 11S is a synthetic high performance hydraulic fluid for life-time application in modern vehicle aggregates. Pentosin CHF 11S is especially designed for hydraulics in the automotive industry with the highest technical requirements such as in: power steering, level control, shock absorber, hydro-pneumatic suspension, stability and traction control, hydraulics for convertible tops, central lock systems, etc.
It is suitable for all extreme conditions and guarantees full performance from -40 Degree Celsius to over 130 Degree Celsius system temperature.
Pentosin CHF 11S meets DIN 51 524T3 and ISO 7308 specification standards.
Pressure Accumulator 6-speed SMG
The pressure accumulator is responsible to store the pressure of the hydraulic system for later access by the actuators. This piston type accumulator has two cells: one cell storing the hydraulic fluid and one cell containing a Nitrogen gas filling which creates the counterpressure. Both cells are separated by a moving piston. Typical symptoms of a faulty pressure accumulator are frequent and short pump cycles. If there is no more preload pressure left in the accumulator, the pump runs every few seconds, which ultimately leads to a consequential damage of the pump motor. Along with the pump motor, a faulty pressure accumulator is one of the most common causes of pressure build-up issues and is one of the few wear parts in the system that should be regularly checked and replaced if necessary.
We offer a brand-new replacement accumulator.
Your wanted part is not listed in the shop? Maybe we can repair it. Have a look at our repairs section!